Cum să întrețineți și să deserviți reactorul?

Daily inspection and cleaning Appearance inspection: Regularly check the reactor shell, connecting pipes, valves and instruments for signs of leakage, corrosion, cracks or damage. Replace or repair damaged parts in time. Cleaning: According to the usage, regularly clean the inside of the reactor to remove residual materials and scaling to avoid affecting the heat transfer efficiency and the purity of the next reaction. Choose a suitable cleaning solution, which may include physical brushing, chemical cleaning or steam flushing. Seal inspection: Check the seals of the reactor, such as gaskets, sealing rings, etc., to ensure that they are intact to prevent leakage. Replace aged or worn seals as needed. Regular maintenance Lubrication: Regularly lubricate the rotating parts of the reactor, such as the bearings of the agitator, according to the lubrication cycle and lubricant type recommended by the manufacturer. Check the drive system: Check the working status of the agitator and other mechanical drive parts to ensure that the motor, reducer and transmission run smoothly without abnormal sounds. Heat exchange efficiency: If the Reactorul este echipat cu un sistem de schimb de căldură, eficiența schimbătorului de căldură trebuie verificată în mod regulat, iar suprafața de schimb de căldură trebuie curățată pentru a asigura performanțe bune de transfer de căldură . sisteme electrice și de control: Verificați starea de funcționare a circuitelor electrice, senzorilor și controlerelor pentru a se asigura că semnalele sunt corecte și efectuează calibrarea în mod regulat .}